Laser.

Ci-dessous un extrait traitant le sujet : Laser.. Ce document contient 2307 mots. Pour le télécharger en entier, envoyez-nous un de vos documents grâce à notre système d’échange gratuit de ressources numériques ou achetez-le pour la modique somme d’un euro symbolique. Cette aide totalement rédigée en format pdf sera utile aux lycéens ou étudiants ayant un devoir à réaliser ou une leçon à approfondir en : Echange

---

Laser.
I

INTRODUCTION

Laser, a device that produces and amplifies light. The word laser is an acronym for Light Amplification by Stimulated Emission of Radiation. Laser light is very pure in
color, can be extremely intense, and can be directed with great accuracy. Lasers are used in many modern technological devices including bar code readers, compact
disc (CD) players, and laser printers. Lasers can generate light beyond the range visible to the human eye, from the infrared through the X-ray range. Masers are
similar devices that produce and amplify microwaves.

II

PRINCIPLES OF OPERATION

Lasers generate light by storing energy in particles called electrons inside atoms and then inducing the electrons to emit the absorbed energy as light. Atoms are the
building blocks of all matter on Earth and are a thousand times smaller than viruses. Electrons are the underlying source of almost all light.
Light is composed of tiny packets of energy called photons. Lasers produce coherent light: light that is monochromatic (one color) and whose photons are "in step" with
one another.

A

Excited Atoms

At the heart of an atom is a tightly bound cluster of particles called the nucleus. This cluster is made up of two types of particles: protons, which have a positive charge,
and neutrons, which have no charge. The nucleus makes up more than 99.9 percent of the atom's mass but occupies only a tiny part of the atom's space. Enlarge an
atom up to the size of Yankee Stadium and the equally magnified nucleus is only the size of a baseball.
Electrons, tiny particles that have a negative charge, whirl through the rest of the space inside atoms. Electrons travel in complex orbits and exist only in certain specific
energy states or levels (see Quantum Theory). Electrons can move from a low to a high energy level by absorbing energy. An atom with at least one electron that
occupies a higher energy level than it normally would is said to be excited. An atom can become excited by absorbing a photon whose energy equals the difference
between the two energy levels. A photon's energy, color, frequency, and wavelength are directly related: All photons of a given energy are the same color and have the
same frequency and wavelength.
Usually, electrons quickly jump back to the low energy level, giving off the extra energy as light (see Photoelectric Effect). Neon signs and fluorescent lamps glow with
this kind of light as many electrons independently emit photons of different colors in all directions.

B

Stimulated Emission

Lasers are different from more familiar sources of light. Excited atoms in lasers collectively emit photons of a single color, all traveling in the same direction and all in
step with one another. When two photons are in step, the peaks and troughs of their waves line up. The electrons in the atoms of a laser are first pumped, or
energized, to an excited state by an energy source. An excited atom can then be "stimulated" by a photon of exactly the same color (or, equivalently, the same
wavelength) as the photon this atom is about to emit spontaneously. If the photon approaches closely enough, the photon can stimulate the excited atom to
immediately emit light that has the same wavelength and is in step with the photon that interacted with it. This stimulated emission is the key to laser operation. The
new light adds to the existing light, and the two photons go on to stimulate other excited atoms to give up their extra energy, again in step. The phenomenon snowballs
into an amplified, coherent beam of light: laser light.
In a gas laser, for example, the photons usually zip back and forth in a gas-filled tube with highly reflective mirrors facing inward at each end. As the photons bounce
between the two parallel mirrors, they trigger further stimulated emissions and the light gets brighter and brighter with each pass through the excited atoms. One of
the mirrors is only partially silvered, allowing a small amount of light to pass through rather than reflecting it all. The intense, directional, and single-colored laser light
finally escapes through this slightly transparent mirror. The escaped light forms the laser beam.
Albert Einstein first proposed stimulated emission, the underlying process for laser action, in 1917. Translating the idea of stimulated emission into a working model,
however, required more than four decades. The working principles of lasers were outlined by the American physicists Charles Hard Townes and Arthur Leonard
Schawlow in a 1958 patent application. (Both men won Nobel Prizes in physics for their work, Townes in 1964 and Schawlow in 1981). The patent for the laser was
granted to Townes and Schawlow, but it was later challenged by the American physicist and engineer Gordon Gould, who had written down some ideas and coined the
word laser in 1957. Gould eventually won a partial patent covering several types of laser. In 1960 American physicist Theodore Maiman of Hughes Aircraft Corporation
constructed the first working laser from a ruby rod.

III

TYPES OF LASERS

Lasers are generally classified according to the material, called the medium, they use to produce the laser light. Solid-state, gas, liquid, semiconductor, and free electron
are all common types of lasers.

A

Solid-State Lasers

Solid-state lasers produce light by means of a solid medium. The most common solid laser media are rods of ruby crystals and neodymium-doped glasses and crystals.
The ends of the rods are fashioned into two parallel surfaces coated with a highly reflecting nonmetallic film. Solid-state lasers offer the highest power output. They are
usually pulsed to generate a very brief burst of light. Bursts as short as 12 × 10-15 sec have been achieved. These short bursts are useful for studying physical
phenomena of very brief duration.
One method of exciting the atoms in lasers is to illuminate the solid laser material with higher-energy light than the laser produces. This procedure, called pumping, is
achieved with brilliant strobe light from xenon flash tubes, arc lamps, or metal-vapor lamps.

B

Gas Lasers

The lasing medium of a gas laser can be a pure gas, a mixture of gases, or even metal vapor. The medium is usually contained in a cylindrical glass or quartz tube. Two
mirrors are located outside the ends of the tube to form the laser cavity. Gas lasers can be pumped by ultraviolet light, electron beams, electric current, or chemical
reactions. The helium-neon laser is known for its color purity and minimal beam spread. Carbon dioxide lasers are very efficient at turning the energy used to excite

their atoms into laser light. Consequently, they are the most powerful continuous wave (CW) lasers--that is, lasers that emit light continuously rather than in pulses.

C

Liquid Lasers

The most common liquid laser media are inorganic dyes contained in glass vessels. They are pumped by intense flash lamps in a pulse mode or by a separate gas laser
in the continuous wave mode. Some dye lasers are tunable, meaning that the color of the laser light they emit can be adjusted with the help of a prism located inside
the laser cavity.

D

Semiconductor Lasers

Semiconductor lasers are the most compact lasers. Gallium arsenide is the most common semiconductor used. A typical semiconductor laser consists of a junction
between two flat layers of gallium arsenide. One layer is treated with an impurity whose atoms provide an extra electron, and the other with an impurity whose atoms
are one electron short. Semiconductor lasers are pumped by the direct application of electric current across the junction. They can be operated in the continuous wave
mode with better than 50 percent efficiency. Only a small percentage of the energy used to excite most other lasers is converted into light.
Scientists have developed extremely tiny semiconductor lasers, called quantum-dot vertical-cavity surface-emitting lasers. These lasers are so tiny that more than a
million of them can fit on a chip the size of a fingernail.
Common uses for semiconductor lasers include compact disc (CD) players and laser printers. Semiconductor lasers also form the heart of fiber-optics communication
systems (see Fiber Optics).

E

Free Electron Lasers

Free electron lasers employ an array of magnets to excite free electrons (electrons not bound to atoms). First developed in 1977, they are now becoming important
research instruments. Free electron lasers are tunable over a broader range of energies than dye lasers. The devices become more difficult to operate at higher
energies but generally work successfully from infrared through ultraviolet wavelengths. Theoretically, electron lasers can function even in the X-ray range.
The free electron laser facility at the University of California at Santa Barbara uses intense far-infrared light to investigate mutations in DNA molecules and to study the
properties of semiconductor materials. Free electron lasers should also eventually become capable of producing very high-power radiation that is currently too expensive
to produce. At high power, near-infrared beams from a free electron laser could defend against a missile attack.

IV

LASER APPLICATIONS

The use of lasers is restricted only by imagination. Lasers have become valuable tools in industry, scientific research, communications, medicine, the military, and the
arts.

A

Industry

Powerful laser beams can be focused on a small spot to generate enormous temperatures. Consequently, the focused beams can readily and precisely heat, melt, or
vaporize material. Lasers have been used, for example, to drill holes in diamonds, to shape machine tools, to trim microelectronics, to cut fashion patterns, to synthesize
new material, and to attempt to induce controlled nuclear fusion (see Nuclear Energy).
Highly directional laser beams are used for alignment in construction. Perfectly straight and uniformly sized tunnels, for example, may be dug using lasers for guidance.
Powerful, short laser pulses also make high-speed photography with exposure times of only several trillionths of a second possible.

B

Scientific Research

Because laser light is highly directional and monochromatic, extremely small amounts of light scattering and small shifts in color caused by the interaction between laser
light and matter can easily be detected. By measuring the scattering and color shifts, scientists can study molecular structures of matter. Chemical reactions can be
selectively induced, and the existence of trace substances in samples can be detected. Lasers are also the most effective detectors of certain types of air pollution. (see
Chemical Analysis; Photochemistry).
Scientists use lasers to make extremely accurate measurements. Lasers are used in this way for monitoring small movements associated with plate tectonics and for
geographic surveys. Lasers have been used for precise determination (to within one inch) of the distance between Earth and the Moon, and in precise tests to confirm
Einstein's theory of relativity. Scientists also have used lasers to determine the speed of light to an unprecedented accuracy.
Very fast laser-activated switches are being developed for use in particle accelerators. Scientists also use lasers to trap single atoms and subatomic particles in order to
study these tiny bits of matter (see Particle Trap).

C

Communications

Laser light can travel a large distance in outer space with little reduction in signal strength. In addition, high-energy laser light can carry 1,000 times the television
channels today carried by microwave signals. Lasers are therefore ideal for space communications. Low-loss optical fibers have been developed to transmit laser light for
earthbound communication in telephone and computer systems. Laser techniques have also been used for high-density information recording. For instance, laser light
simplifies the recording of a hologram, from which a three-dimensional image can be reconstructed with a laser beam. Lasers are also used to play audio CDs and
videodiscs (see Sound Recording and Reproduction).

D

Medicine

Lasers have a wide range of medical uses. Intense, narrow beams of laser light can cut and cauterize certain body tissues in a small fraction of a second without
damaging surrounding healthy tissues. Lasers have been used to "weld" the retina, bore holes in the skull, vaporize lesions, and cauterize blood vessels. Laser surgery
has virtually replaced older surgical procedures for eye disorders. Laser techniques have also been developed for lab tests of small biological samples.

E

Military Applications

Laser guidance systems for missiles, aircraft, and satellites have been constructed. Guns can be fitted with laser sights and range finders. The use of laser beams to
destroy hostile ballistic missiles has been proposed, as in the Strategic Defense Initiative urged by U.S. president Ronald Reagan and the Ballistic Missile Defense
program supported by President George W. Bush. The ability of tunable dye lasers to selectively excite an atom or molecule may open up more efficient ways to
separate isotopes for construction of nuclear weapons.

V

LASER SAFETY

Because the eye focuses laser light just as it does other light, the chief danger in working with lasers is eye damage. Therefore, laser light should not be viewed either
directly or reflected.
Lasers sold and used commercially in the United States must comply with a strict set of laws enforced by the Center for Devices and Radiological Health (CDRH), a
department of the Food and Drug Administration. The CDRH has divided lasers into six groups, depending on their power output, their emission duration, and the
energy of the photons they emit. The classification is then attached to the laser as a sticker. The higher the laser's energy, the higher its potential to injure. Highpowered lasers of the Class IV type (the highest classification) generate a beam of energy that can start fires, burn flesh, and cause permanent eye damage whether
the light is direct, reflected, or diffused. Canada uses the same classification system, and laser use in Canada is overseen by Health Canada's Radiation Protection
Bureau.
Goggles blocking the specific color of photons that a laser produces are mandatory for the safe use of lasers. Even with goggles, direct exposure to laser light should be
avoided.

Reviewed By:
April Holladay
Microsoft ® Encarta ® 2009. © 1993-2008 Microsoft Corporation. All rights reserved.